The Hatco PWC-12 is a countertop plate warmer for servery and display use, preheating and holding serving plates within easy reach. Using warm plates can help hot dishes retain their serving temperature for longer, while the countertop format supports convenient customer or staff access.

It holds up to 25 plates measuring no more than 12 inches or 305 mm in diameter. Its open, doorless layout makes plates straightforward to load and retrieve during service and provides easier access when cleaning the interior.

The covered digital controller can be adjusted from 40°C to 50°C. A separate power on/off switch simplifies operation, while the controller cover helps guard against accidental adjustment during a busy service.

This plug-powered UK variant operates at 240V with a 463 W rating. It should be connected to a correctly rated, properly earthed socket, and the electrical information on the unit should be checked before connection.

Energy-efficient LED lighting shines into the cabinet from above. This makes the stored plates easier to see and retrieve without relying entirely on the surrounding room lighting.

Yes. Up to 3 units can be daisy-chained where the installation and electrical supply are suitable. The units must not be stacked, and the combined electrical load and connection arrangement should remain within Hatco's operating requirements.

This PWC-12 version has a silver stainless-steel finish. It is a Hatco countertop plate warmer intended for servery and display applications, combining a durable commercial appearance with an open front for convenient plate access.

The product weight is 26kg. It includes a 2-year parts and labour warranty, with the same warranty period given for EIRE, providing useful support coverage for commercial operators.

The manufacturer's model reference is PWC-12. This identifies the countertop version designed for plates up to 12 inches in diameter and distinguishes it from the built-in PWB model.

Place it indoors on a level, stable countertop that can support the warmer and its contents. Keep at least 25 mm from combustible walls or materials, leave the top clear and avoid locations beside strong draughts, extraction systems, air-conditioning outlets or exterior doors.

Allow approximately 60 minutes for preheating before relying on it to reach its selected setpoint. The controller is initially set to 40°C, and a changed setpoint remains in memory until it is adjusted again.

Switch it off, disconnect the power and let it cool before cleaning. Use only non-abrasive cleaners and cloths. Do not immerse it, saturate it with water, steam clean it or use a jet spray, as the unit is not waterproof or jet-proof.