It is designed for fast, front-of-house toast production in busy breakfast-buffet and self-service catering operations. Its double-feed format produces 500 slices per hour, helping venues maintain a steady supply during concentrated breakfast demand.

It is optimised for bread under 20 mm thick but can accommodate slices up to 30 mm. This gives operators flexibility across common buffet bread while retaining the best performance with the thinner slices normally used in high-volume breakfast service.

Yes. It runs quietly and is straightforward to use, while the speed controller lets staff adjust toasting time for different types of bread. These qualities support front-of-house operation where simple controls and lower operating noise are valuable during self-service breakfast periods.

Its automatic energy-saving system reduces consumption when demand pauses. The conveyor motor stops after 5 minutes without activity, element output reduces after 30 minutes and sleep mode follows after 70 minutes. The bread sensor wakes the machine when another slice is loaded.

Yes. The speed controller changes the time bread spends in the toaster, allowing lighter or darker results and adjustment for different breads. Once the preferred speed is found, the electronic lock can hold that setting so buffet users cannot alter it accidentally.

The sculpted return chute has LED lighting that makes the holding bay visible from across a buffet. Its wide opening gives diners easy access, while radiant heat from the elements helps keep finished toast warm until it is collected.

A slide-out crumb tray supports daily crumb removal, while the hinged top cover opens for access inside the toast cavity. Disconnect the toaster, let it cool and use a damp, non-abrasive cloth with warm soapy water; do not immerse it or use a water jet.

The latch secures the hinged top cover during operation and must be released before opening it for cleaning. Opening the cover shuts down the elements and conveyor; normal operation resumes after it is closed. The cover should only be opened once the toaster is cool.

This is a 2.9kW electric toaster for a 220-240V supply, using a 16A 3-pin Commando plug. The connector and load should be allowed for when planning its position and electrical provision, and an extension lead should not be used.

Its temperature range is 0°C to 110°C, with 110°C as the upper value. During normal operation, the user adjusts the conveyor speed to control toasting time and browning rather than selecting a cooking temperature.

The ST500A is the natural silver version, with a modern brushed stainless steel exterior and durable stainless steel elements. The shaped exterior is intended for visible buffet service, while the brushed finish helps disguise fingerprints in a frequently handled environment.

The toaster has an unpacked weight of 23.8kg and a packed weight of 25 kg. Its weight should be considered when selecting a counter and when moving it; the operating guidance calls for 2 people to lift the machine.

It includes a 1-year warranty. Normal warranty support depends on correct installation, maintenance and use, so operators should retain proof of purchase and follow the operating and cleaning instructions.

The natural silver ST500A has barcode 9325656003269 and is supplied as 1 conveyor toaster per pack. The pack includes the appropriate toaster, its crumb tray and operating instructions, helping buyers distinguish it from other Sycloid models and colour variants.

It is intended for commercial toasting of bread products without spreads or fillings. Pizza, buns and unusually thick products are unsuitable. Using a consistent bread type and adjusting the conveyor speed after a test batch helps produce repeatable results across service.

Place it on a firm, level and well-ventilated surface, at least 100 mm from combustible materials and 50 mm from another appliance. It should not be installed on top of cooking equipment, and its cooling airflow must remain unobstructed.

A rapidly flashing amber light indicates warm-up and a steady amber light indicates normal operation. A rapidly flashing red light shows that speed locking is in progress, while steady red means locked. Alternating amber and red lights indicate that the cover is open.