Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A - Dishwashers
With base rack, tray support and 1 open basket
Original price was: £28,986.99£34,784.39.£23,690.94£28,429.13Current price is: £23,690.94£28,429.13. Excl. VATIncl. VAT
Description
Cleans pots and pans, cast iron cookware, baking tins, trays and racks with perfect wash results. With drain and exhaust heat recovery and integrated softener.
- Front Loading operation – 120 / 240 / 360 sec and special cycles
- Visiotronic Control – thanks to the large START button combined with a text and graphics display, the machine is easy to operate
- Drain Heat Recovery – the energy from the hot waste water is used to heat fresh water up to 45°C before it reaches its final rinse temperature in the boiler, saving up to 6,350 kWh per year
- Exhaust Heat Recovery – using energy from the 60°C hot waste steam to heat the incoming fresh water can save up to 5,000kWh per year in energy
- CLIP-IN wash and rinse arms – makes cleaning the machine as simple as possible
- Integrated Water Softener
- USB download of operational data
- Supplied with base rack, tray support and 1 open basket
- ROTOR-X Wash System – cross joint 4-spoke wash arms are unique to Hobart, providing an extremely high wash performance on stubborn, baked on pans and utensils
- Senso-active resource management constantly monitors the quality of the wash water and water consumption is adapted accordingly. This can reduce operating costs by up to 20% compared to conventional machines
- GENIUS-X² Fine Filter system – cleans soiled water in just 3 steps, reducing detergent consumption by up to 35%
- Deep drawn wash tank – no edges or joins for debris and bacteria to collect
Additional information
| Dimensions | 1984(H) x 780(W) x 945(D)mm |
|---|---|
| Material | Stainless Steel |
| Voltage | 400V |
| Product Weight | 220kg |
| Brand | Hobart |
| Sub Category | Dishwashers & Glasswashers |
| Section | Utensil Washers |
| Product Family | Catering Appliances |
| Main Colour | Silver |
| Secondary Colour | Silver |
| Product Depth | 945 |
| Drainage | Drain Pump |
| Power | Three Phase |
| Height (mm) | 1984 |
| Product Type | Utensil Washers |
| Wattage | 15.6kW |
| Width (mm) | 780 |
| Electrical | Yes |
| Delivery To Ireland | 5-6 weeks |
Frequently Asked Questions
Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A FAQs
What is the Hobart utensil washer intended to help a busy operation achieve?
The Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A is a commercial utensil washer for hospitality operations processing demanding wash loads through busy service periods. ROTOR-X Wash System - cross joint 4-spoke wash arms are unique to Hobart, providing an extremely high wash performance on stubborn, baked on pans and utensils.
How do the controls on the Hobart UXRCS-10A utensil washer support day-to-day operation?
The Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A provides these operating features:
- Visiotronic Control - thanks to the large START button combined with a text and graphics display, the machine is easy to operate
How should the water and drainage connections for the Hobart utensil washer be prepared?
The drainage arrangement is Drain Pump. Drain Heat Recovery - the energy from the hot waste water is used to heat fresh water up to 45°C before it reaches its final rinse temperature in the boiler, saving up to 6,350 kWh per year; Exhaust Heat Recovery - using energy from the 60°C hot waste steam to heat the incoming fresh water can save up to 5,000kWh per year in energy; Integrated Water Softener; Senso-active resource management constantly monitors the quality of the wash water and water consumption is adapted accordingly. This can reduce operating costs by up to 20% compared to conventional machines; GENIUS-X² Fine Filter system - cleans soiled water in just 3 steps, reducing detergent consumption by up to 35%. Confirm incoming water pressure, water treatment, chemical connections and drain position with the installation requirements.
Will the Hobart UXRCS-10A utensil washer fit the intended delivery route and operating position?
The Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A measures 1984(H) x 780(W) x 945(D)mm and has a net product weight of 220kg. Check the delivery route, final position and required operating clearances before ordering.
Which materials and support arrangement does the Hobart UXRCS-10A utensil washer use?
The Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A uses Stainless Steel construction with a Silver finish. Buyers can use these construction details to assess cleaning access and compatibility with the surrounding workspace.
Which power connection should be provided for the Hobart utensil washer?
The Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A requires a rated electrical input of 15.6kW, a 400V supply, and a Three Phase connection. This is a specialist commercial connection, so confirm the site supply and arrange installation by a suitably competent engineer.
How should the Hobart UXRCS-10A utensil washer be cleaned after service?
Drain and clean the Hobart Utensil Washer with Drain and Exhaust Heat Recovery UXRCS-10A after service, rinse filters and wash arms, and keep detergent and rinse-aid systems correctly supplied. Remove scale and debris in line with its operating instructions.
What references should be quoted when ordering or requesting support for the Hobart utensil washer?
Quote Smart Hospitality Supplies product code FT118 when ordering or requesting support. The model reference is UXRCS-10A. Quoting the SKU and manufacturer reference together reduces the risk of confusing this unit with a related variant.
Can operational data be downloaded from the Hobart UXTL-10A utensil washer?
Yes. The Hobart UXTL-10A supports USB download of operational data, helping authorised operators or service personnel retain useful machine information for monitoring and support.
About Hobart
