It dries and polishes most glass shapes and sizes in seconds, producing a crystal-clear professional finish. This helps busy bars, restaurants and hospitality venues reduce manual polishing time while presenting cleaner-looking glassware to customers.

Its five rotating brushes can polish up to 350 glasses per hour. The brushes work on the inside and outside of each glass simultaneously, while fan-blown warm air assists with drying for a faster turnaround during busy service periods.

No polishing liquid is required. The combination of rotating brushes and warm air dries and polishes the glassware, avoiding an additional consumable and simplifying day-to-day operation.

Yes. It has a simple on/off switch and needs no programming. Once switched on, hold the glass by its base and place it over the centre brush; gently turning the glass left or right can improve the polishing result.

The machine has a silver stainless-steel body designed to resist most everyday wear and tear. This construction gives it a durable, professional appearance suited to regular use in commercial hospitality environments.

The FA118 operates at 220-240V, 50/60Hz and has a 1200-1500 W power rating. Its dimensions are 510 mm high, 300 mm wide and 330 mm deep, so buyers can assess both electrical suitability and the counter space required.

The machine has a net weight of 15.3kg. Its packed gross weight is 17.8kg, which is the more relevant figure when planning delivery and handling before the unit is unpacked.

The package includes the Buffalo glass polisher, five brushes, an air pipe and operating instructions. During assembly, the shorter brush belongs on the centre shaft, with each brush locked into its shaft notch by turning it anticlockwise.

Place it on a flat, stable indoor surface and leave 200 mm between the machine and surrounding walls or objects for ventilation. Keep the unit unobstructed while operating and have installation or repairs handled by a qualified technician when required.

Keep the brushes dry because wet brushes will not dry or polish glass effectively. If they become damp during intensive use, run the machine without glassware for 20 minutes. At the end of the day, a 20-minute empty run also helps prepare them for the next service.

Switch it off, disconnect it and allow it to cool. Wipe the exterior daily with a damp cloth and dry it afterwards. Do not immerse the unit or use a jet or pressure washer, and inspect the brushes periodically for wear or ageing.

Automatic overheating protection switches the machine off if it becomes too hot. Allow it to cool for 20 minutes before resuming operation. The accessible surfaces and discharged air can become hot, so the unit should remain attended and unobstructed during use.

The machine includes a 2-year parts and labour warranty. For customers in Ireland, the applicable cover is 2 years of on-site parts and labour.

The product is a silver Buffalo commercial glass polisher with model code FA118 and EAN barcode 5050984628603. Checking both identifiers helps distinguish the exact machine when ordering or discussing support.