The Lincat Opus 800 Free Standing Natural Gas Dual Filtration Fryer OG8111/OP2 is designed for professional kitchens that need reliable, repeatable cooking through demanding service periods. Its commercial format supports an efficient, repeatable workflow. Heat transfer technology delivers quicker response to temperature change and faster recovery. Its format is most valuable where the available capacity, services and operating pattern match the demands of the venue.

The Lincat Opus 800 Free Standing Natural Gas Dual Filtration Fryer OG8111/OP2 has capacity 28Ltr. 3kg max weight capacity per basket. This helps buyers compare the appliance with expected peak demand rather than relying on its external size alone.

The available temperature range is 90°C to 190°C. Select a suitable setting for the food, load and cooking method, then follow the operating instructions and the venue's food-safety procedure.

Useful operating features include:

• Twin tank models features two independently controlled tanks to avoid cross contamination of oil
• Close tolerance thermostat range from 130°C to 190°C for accurate temperature control

These controls help staff match the appliance to the task while keeping routine operation clear and repeatable.

The appliance supports a useful range of professional cooking tasks:

• Integral pumped filtration option, filter oil and be ready to fry again in under 5 minutes
• Externally fired heating system gives unobstructed access to fryer tanks for ease of cleaning

Choose the mode, load and programme that suit the recipe, then follow the operating instructions for safe and consistent results.

The cooking format is 2 x 190mm x 470mm. Check tray depth, spacing and any included runners before choosing additional gastronorm pans or accessories.

The Lincat Opus 800 Free Standing Natural Gas Dual Filtration Fryer OG8111/OP2 measures 1070(H) x 600(W) x 800(D)mm and has a net product weight of 144.3kg. Check the full delivery route, final operating position and required working clearances before ordering.

The Lincat Opus 800 Free Standing Natural Gas Dual Filtration Fryer OG8111/OP2 uses Stainless Steel construction, has a Silver finish, is mounted on Castors. This commercial format supports regular cleaning and helps the appliance fit into a busy back-of-house workflow.

The Lincat Opus 800 Free Standing Natural Gas Dual Filtration Fryer OG8111/OP2 requires an electrical requirement of Gas/Electric, a 230V supply, and a Natural Gas connection. This is a specialist commercial connection, so confirm the site supply and arrange installation by a suitably competent engineer. Allow for any water, drainage or ventilation services required by the appliance and its installation instructions.

Allow the appliance to cool safely, remove food debris and clean contact surfaces with suitable non-abrasive products. Use the automatic wash cycle where fitted and follow the instructions for probes, burners, oil or steam-system care.

Use Smart Hospitality Supplies product code DM540-N when identifying this appliance. The model reference is OG8111/OP2/N. The barcode is 5056105103165. It carries a 2 Years Parts & Labour warranty. Keeping these identifiers with your purchase records makes future parts, servicing and product enquiries much more precise.