This low-profile refrigerated food display bar suits front-of-house presentation and back-of-house preparation, including pizza-prep and similar chilled-ingredient stations. Its long stainless steel well provides organised access to ingredients while keeping the working area visually tidy.

It accommodates 10 x 1/3 GN containers. The positions accept containers up to 100 mm deep, giving a practical ingredient layout for high-volume preparation or service. The GN containers are not included and must be obtained separately.

It holds chilled food between 3°C and 7°C when the surrounding conditions are no higher than 25°C and 60% relative humidity. This makes it suitable for accessible chilled-ingredient presentation during service, with normal food-temperature monitoring still required.

Precise thermostatic control and a digital display make the operating temperature easy to monitor and manage. This gives staff a clear view of the refrigeration condition while ingredients are arranged across the 10 x 1/3 GN positions.

It has a fully welded stainless steel body with a silver finish. The welded construction creates a durable, professional surface for demanding preparation and display areas, while the low-profile form keeps ingredients accessible without adding excessive height above the counter.

No. The glass lid and the gastronorm pans are sold separately. This allows the bar, lid and 1/3 GN container arrangement to be selected for the intended front-of-house or preparation layout.

The refrigerator system cools around the well base and sides to promote even cooling along the full bar length. The unit uses R134a refrigerant, supporting dependable performance across all 10 ingredient positions rather than concentrating cooling at one end.

The FDB10 is 245 mm high and 2107 mm wide. Its low height keeps the ingredient containers accessible, while the width accommodates the full row of 10 x 1/3 GN positions.

The unit operates at 230V and is configured for plug connection. This should be considered when planning its position and the available electrical connection at the preparation or display counter.

No, this model does not have a splashback. Its low-profile, open configuration is intended to keep the row of 1/3 GN ingredient positions accessible from the chosen working side.

The manufacturer reference is FDB10 and the barcode is 5056105104179. These identifiers distinguish the 10 x 1/3 GN, 2107 mm-wide version from the shorter Seal food display bars when ordering or checking delivery paperwork.