The Hallde VCM-42 is a professional food preparation machine for high-demand restaurants, catering kitchens, bakeries, schools, hospitals, retirement homes and other institutional kitchens. It is particularly useful where operators need fast, repeatable preparation or texture-controlled food for different dietary requirements.

It chops, grinds, minces, mixes, purées and blends preparations including meat, fish, fruit, vegetables, aromatic butter, dressings, desserts, soups, pâté, cheese, nuts and mushrooms. It can process raw or cooked ingredients and both dry and liquid preparations, subject to the appropriate batch size and processing time.

The stainless steel bowl has a gross volume of 4 Ltr. Recommended maximum single batches include 1.3kg of meat, fish or aromatic butter and 1Ltr of parsley. Depending on the food and required result, its processing capacity is 0.5-2.5kg per minute.

Its patented scraper system uses 4 scrapers to slow the food's rotation and guide it back towards the central cutting zone for a faster, more even result. The scraper handle can be moved back and forth while processing to clear the bowl walls and return ingredients to the knives.

The knife unit has 2 serrated stainless steel knives with user-exchangeable blades, helping it retain effective cutting performance over extended commercial use. The assembled chopping knife has a diameter of 190 mm, and its condition and sharpness should be checked before operation.

A turning knob selects 2 continuous speeds: 1500 rpm for controlled processing and 3000 rpm for faster cutting. The pulse position runs at 1500 rpm only while the control is held, giving the operator finer control during short cycles where a precise texture is required.

This electric cutter mixer is rated at 750 W and requires a 400V, 3-phase, 50Hz earthed supply. The VCM-42 configuration uses a 16A earthed connection, and installation must be completed by a qualified service mechanic in accordance with the machine's data plate and local supply arrangements.

The motor drives the knife unit directly, without intermediate belts that could require replacement. Thermal protection is also fitted. This straightforward drive arrangement supports dependable operation, although the machine should be allowed to cool between batches because it is not designed for continuous use.

The VCM-42 has a grey aluminium machine base and a 4 Ltr stainless steel bowl. Its knife unit is acetal and the serrated knives are stainless steel, combining a sturdy commercial base with food-processing components selected for their particular functions.

The VCM-42 measures 440(H) x 260(W) x 290(L)mm and has a net weight of 17kg. These measurements help operators assess worktop clearance and handling requirements before installation, while the compact 260 mm width limits the amount of counter frontage it occupies.

Switch the machine off, isolate the electricity supply and remove the detachable parts. All loose parts are machine washable; take particular care around the sharp knives. Wipe the machine base with a damp cloth and dry it immediately. Do not spray it with water or use chlorine, abrasives or scouring pads.

The VCM-42 incorporates 3 individual safety switches, a mechanical motor brake, thermal protection and an IP44 machine enclosure. Before use, operators should confirm that the shaft stops within 4 seconds when the safety arm is moved away and that the machine cannot start with its bowl, knife and lid removed.

For a starting fault, check that the scraper, lid and bowl are correctly assembled, then check the electrical connection and fuse. An activated thermal switch can require 10-30 minutes before restart. For poor cutting, inspect the knives, reduce the batch, pre-cut firm food to no more than 4 x 4 x 4cm and use the scraper.

The Hallde VCM-42 carries EAN barcode 7333337223709 and supplier reference 5HVCM42. Using the full product name together with these identifiers helps distinguish this 4 Ltr, 400V 3-phase cutter mixer from related Hallde machines and voltage variants.

For Republic of Ireland orders, the Hallde VCM-42 carries a 1-year parts-only manufacturer's warranty. Buyers should retain their purchase details and confirm the service route applicable to their location when arranging warranty support.