It suits mobile commercial operators carrying out light-to-medium-duty cleaning of vehicles, machines, structures, tools, facades, terraces and gardening equipment. This Karcher pressure washer sits within the pressure-wash and steam-cleaner range and uses hot water to support efficient turnaround across varied external cleaning jobs.

This compact hot water pressure washer combines a 3-piston axial pump with an air-cooled 2-pole electric motor. The arrangement provides the pumping and motor system needed for professional mobile cleaning while keeping the machine in a compact upright format.

A simple OFF-COLD-HOT control lets the operator switch the machine off, use unheated high-pressure water or engage hot-water cleaning. This straightforward selection is useful for light-to-medium-duty work where operators need to move quickly between different cleaning requirements.

Its upright body and large wheels help with movement over unpaved surfaces, landings and stairs, while the compact format is small enough for a typical estate car. The spill-proof pump and fuel tank support transport lying down; drain residual water first and secure the machine against slipping or tipping.

The machine measures 994(H) x 618(W) x 618(L)mm. Its compact upright design reduces the floor area needed for storage and makes it easier to accommodate in service vehicles or restricted equipment stores.

A fine-mesh water filter helps prevent contamination from reaching the high-pressure pump. It can be removed from the outside for cleaning, making routine filter checks more convenient and helping reduce avoidable pump wear caused by dirty incoming water.

The cleaner delivers a water flow rate of 450 l/h and an operating pressure of 110 bar, equivalent to 11 MPa, when used with its standard nozzle. This output supports routine light-to-medium-duty commercial cleaning.

The maximum hot-water operating temperature is 80°C. This heated output can help operators tackle oily or persistent soiling more effectively than cold-water cleaning alone, while the OFF-COLD-HOT selector allows cold operation when heat is unnecessary.

The burner has a 6.5L fuel tank, and the fuel-oil consumption figure is 2.4kg/h. These figures help operators estimate fuel requirements for mobile cleaning schedules and plan refilling around the expected working period.

It comes with a 10m high-pressure hose, an EASY!Force Advanced trigger gun, a triple nozzle, pressure-switch control and a spray lance. The 10m hose gives the operator useful reach around vehicles, machinery and working areas without continually repositioning the cleaner.

This is the plug-fitted 240V version, operating on single-phase 50Hz power with a 2.2kW power rating. The intended work area needs a suitable electrical supply for this professional pressure washer.

The cleaner includes a 1-year parts and labour warranty. Retain proof of purchase for any warranty claim made through the dealer or an authorised service centre.

For ordering, use Smart UK SKU FU067, barcode 4054278139777 or product reference 10649020. The manufacturer order number is 1.064-902.0, giving buyers several identifiers to check when ordering the machine or discussing compatible service parts.

It requires at least 500 l/h of incoming water through a hose with a minimum 1/2-inch diameter and 7.5m length. Feed pressure must not exceed 6 bar, and inlet water must be no hotter than 30°C. Use clean water to limit deposits and premature wear.

The machine draws detergent from an external container through its suction hose. Set the nozzle to CHEM for detergent intake. If detergent is not being drawn, check that the container is not empty, clean the suction-hose filter and inspect the backflow valve.

Store it in a frost-free area because trapped water can damage the machine when frozen. If frost-free storage is unavailable, drain the water and follow the correct antifreeze flushing procedure. Switch off, unplug, depressurise and allow the machine to cool before maintenance or extended storage.

Check that the water tap is open, the incoming supply is adequate, the water filter is clean and all connections are secure. Air can be vented by cycling the machine with the trigger gun open. Clean a blocked nozzle; if these checks do not restore pressure, contact an authorised service engineer.

Operate the cleaner only while it is standing on a sound surface, and never direct the high-pressure jet at people, animals, live electrical equipment or the machine itself. Do not leave it unattended while running, and secure the trigger gun against unintended operation when work stops.