Among compact commercial food processors, the Robot Coupe R2 suits catering operations that need 1 machine for pâtés, dough, chopped herbs, liquidised soups, fresh breadcrumbs, minced ingredients, mousses, emulsions and smooth stuffings. Its broad processing range supports varied preparation work completed quickly and consistently.

It has a 2.9L stainless-steel bowl with a handle and is intended for approximately 10-20 covers. The bowl size provides a practical balance between compact countertop operation and routine preparation for smaller commercial meal services.

The recommended processing amount is 0.3-1kg, depending on the food and preparation. Actual quantities and processing times vary with the ingredients and recipe, so operators should avoid overloading the bowl and watch the mixture closely to achieve the required texture.

The direct-drive induction motor delivers 550 W and runs at a single speed of 1500 rpm. A separate pulse function gives more precise stop-start control, helping the operator manage texture when chopping, grinding, mixing or working with smaller quantities.

Operation uses straightforward push-button controls: green for on, red for off and black for pulse. The see-through Lexan bowl lid lets the operator monitor processing, while its central opening allows liquid or solid ingredients to be added without removing the lid.

It has a magnetic safety system, motor brake and thermal protection. Opening the lid stops the motor, while the thermal cut-out stops it after excessive running or overloading. If thermal protection operates, allow the machine to cool fully before restarting it.

This UK single-phase model uses a 230V, 50Hz supply, draws 5A and is supplied with a plug. It must be connected to an earthed socket, and the available supply should match the rating plate before the machine is used.

The unit is 280 mm deep. This measurement helps with countertop planning, although adequate working space should also be allowed for safe access to the bowl, lid and front controls during preparation.

Place the cutter mixer on a stable, solid worktop and connect it to an earthed supply matching its rating plate. Fit the bowl, blade and lid in the correct locked positions before starting, and never run the machine empty or override its safety system.

The standard processing equipment comprises the 2.9L stainless-steel bowl and lid, plus a bowl-base assembly with 2 smooth-edged stainless-steel blades and a detachable cap. The handled bowl improves grip when fitting, removing or carrying it.

Unplug it before cleaning. Never immerse the motor base; wipe it with a damp cloth or sponge. Remove and clean the bowl, lid and blade after each cycle, use products suitable for plastic parts and dry the blade thoroughly to help prevent rusting.

Inspect the blade for wear because cutting quality depends on its sharpness. The motor-shaft seal should be checked regularly and lubricated with a food-safe lubricant, while worn bowl-locating plates should be replaced if the bowl no longer locks securely to the base.

Free Robot Coupe training is available for Robot Coupe products. After receiving the cutter mixer, contact Robot Coupe to arrange the available training and help operators become familiar with its controls, assembly and correct use.

The cutter mixer includes a 1-year warranty. Warranty handling and applicable terms should be confirmed with the supplying distributor, particularly before arranging repair work or returning the appliance.

This is a Robot Coupe food processor supplied as 1 unit under reference 22107. Its barcode is 3700231422107, which provides an additional check that the required R2 cutter mixer has been selected.

The machine combines a grey base with a brushed stainless-steel processing bowl. This gives the countertop unit a practical commercial appearance while using stainless steel for the food-processing vessel.

Compatible options include coarse-serrated twin blades for grinding and kneading, reference 27138, and fine-serrated twin blades for herbs and spices, reference 27061. An additional smooth-edged twin-blade assembly is reference 27055. These are optional rather than part of the standard equipment.