The Roller Grill PGD700 supports busy breakfast and lunchtime services, cooking burgers, sausages, eggs, steaks, seafood, bacon, fish, shellfish, vegetables, onions and omelettes. Its dual-zone layout lets operators prepare different dishes at the same station or reduce the active cooking area during quieter periods.

It uses a strong 10 mm steel cooking plate with a hard-wearing, multi-layer enamel coating. The smooth finish maximises contact between food and the cooking surface, distributes heat evenly and provides non-stick functionality, supporting consistent cooking while making the plate easier to clean.

Yes. Its 2 cooking zones are independently controlled, so one side can be used during quiet periods, the zones can support a cook-and-hold arrangement, or both sides can operate together for full-plate production. This gives the kitchen flexibility as demand changes through service.

The griddle delivers 21838Btu/hr, equivalent to 6400W, through 2 star-shaped burners with 8 arms each. Their shape spreads heat towards the plate edges as well as the centre, helping the cooking surface perform consistently across both zones.

The PGD700 is configured for LPG and propane gas. A set of natural-gas injectors is supplied for conversion to natural gas. Gas conversion, connection and pressure checks should be completed by a suitably qualified person using the correct injector and rating-plate information for the installation.

Each burner combines push-button piezo ignition with high-to-low flame adjustment. After ignition, the control knob can be used to match the heat to the food instead of leaving the burner at full power. Safety thermocouples cut the gas supply if a burner flame goes out.

Cut off the gas, allow the appliance to cool and clean the enamelled plate with warm soapy water and a suitable pad. The front drainage drawer is removable and dishwasher safe; keep it fitted during operation and empty it regularly. Avoid water jets and sudden cooling with ice or cold water.

It is a silver stainless-steel countertop griddle with a 10 mm enamel-coated steel cooking plate. It does not have an undershelf, making it suitable where the buyer needs a self-contained cooking appliance for an existing counter or equipment stand.

Place the griddle on a level, heat-resistant surface with at least 10cm between it and a wall or partition, and keep it away from combustible materials. The gas connection uses a 1/2 thread and an isolating valve, while the required fresh-air flow for combustion is 12.8m3/h.

The Roller Grill PGD700 includes a 2-year manufacturer's warranty. Correct installation, operation and maintenance are important because damage caused by unsuitable installation, misuse, unauthorised repairs or severe thermal shock is outside normal warranty protection.

The appliance is the French-made Roller Grill PGD700 double-zone gas griddle. Smart UK's product code is CZ997 and the manufacturer reference is PGD700, giving buyers and service teams clear identifiers for the exact model.