The Roller Grill 400CFG is a compact commercial crepe maker for producing golden crepes and other thin pancakes. Its smooth cast iron cooking surface can also be used for chapattis, blinis, French socca and similar flatbreads, giving operators flexibility beyond a conventional crepe menu.

An eight-point star-shaped burner spreads heat across the entire circular plate. Combined with the smooth, hard-enamelled cast iron surface, this provides even, direct heat transfer from the centre to the perimeter and supports consistent cooking across each crepe.

The Roller Grill 400CFG combines a silver stainless steel body with a hard-enamelled cast iron cooking plate. The robust plate has a smooth surface that promotes direct heat transfer and helps produce evenly cooked crepes and pancakes.

The circular cooking plate has a diameter of 400 mm. This measurement refers to the cooking surface itself, providing a generously sized single plate for preparing full-size crepes and similar products.

The product data gives an output figure of 60 crepes. As no time period accompanies that figure, it should be treated as a general production indicator rather than a guaranteed hourly rate; actual throughput will depend on batter, cooking settings and operator technique.

The crepe maker is supplied for LPG operation, including propane, and comes with a set of natural-gas injectors. Gas conversion and connection should be completed by a suitably skilled person, with the supply pressure checked against the appliance rating plate.

The appliance has 1 burner, operated through a front control knob. After ignition, the knob adjusts cooking power between high and low flame, allowing the operator to match the heat to the food and avoid leaving the appliance at full power unnecessarily.

The star burner is designed to help carry flame towards a branch extinguished by a draught. A safety thermocouple also cuts off the gas supply if the burner goes out, providing an additional safeguard during operation.

Its compact, simple design is intended to provide useful mobility without sacrificing cooking performance, making it relevant to suitably equipped mobile operations as well as fixed counters. Mobile catering use changes the warranty cover to parts only, so buyers should account for that condition before ordering.

For normal fixed-site use, the Roller Grill gas crepe maker includes a 2-year parts and labour warranty. If it is used for mobile catering, the cover becomes parts only, so the operating setting determines which warranty arrangement applies.

1 crepe maker is supplied per pack. The appliance packaging includes a wooden crepe rake and a set of natural-gas injectors, supporting initial crepe spreading and an appropriate professional gas conversion where required.

Place it on a flat, heat-resistant surface with at least 10 cm between the appliance and a wall or partition. It is intended for outdoor use or indoor operation in a well-ventilated area or beneath a suitable extraction hood, away from combustible materials.

Before first use, remove the protective anti-corrosion grease, clean the appliance and grease the plate with oil. Preheat it for about 15 minutes, then reduce the control to the cooking power needed for the product being prepared.

Turn off the gas supply and let the appliance cool completely. Clean the plate regularly after use, use non-abrasive products, wipe the exterior with warm water and washing liquid, rinse with a damp sponge and dry with a soft cloth. Never use a water jet.

No. The Roller Grill 400CFG is a self-contained countertop crepe maker without an undershelf, so any separate storage or support arrangement must be planned around the chosen service counter.

This product is the Roller Grill gas crepe maker with supplier reference 400 CFG. It is a silver, single-burner commercial crepe maker with a 400 mm circular cooking plate.