The Williams TW18-S3 is a refrigerated preparation well that provides the refrigerator section of a prep counter, keeping chilled ingredients arranged within immediate reach during assembly service. Its wide countertop format suits organised preparation lines where multiple gastronorm ingredients must remain accessible without occupying the work area of a full refrigerated counter.

The stainless-steel TW18-S3 accommodates 9 x 1/3 GN containers and also accepts 100 mm deep 1/3 GN and 1/6 GN pans. The gastronorm pans are not included, allowing operators to select a pan combination suited to their ingredient layout.

The external dimensions are 241 mm high, 1862 mm wide and 385 mm deep. Its internal area measures 1569 mm wide, 305 mm deep and 105 mm high; opening the hinged lid increases the overall depth to 447 mm and height to 563 mm.

The preparation well operates from 4°C to 8°C and is engineered for efficient operation in ambient temperatures up to 32°C. Adequate ventilation remains important for effective refrigeration, especially when the unit is installed within a busy preparation area.

The hinged lid is designed to stay open while ingredients are being accessed. Non-slip rubber feet help keep the unit stable on its supporting surface, while the removable unit cover provides access to that section when required.

A digital thermometer gives the operator a clear temperature reading, while the adjustable thermostat provides direct control over the chilled operating range. This combination helps staff monitor conditions and make adjustments during preparation service.

The silver unit has food-safe stainless-steel exterior and interior surfaces, combined with precision-injected, high-density polyurethane insulation. The insulation is 35mm thick, supporting the refrigerated well while the stainless-steel finish suits a commercial food-preparation environment.

A space-saving wall-mount arrangement is available for the TW18-S3, and the unit has no built-in splashback. Installation planning should retain adequate ventilation around the refrigeration equipment and account for the open-lid depth and height.

The TW18-S3 uses a 230V, 50Hz, single-phase supply with a 13A fuse and is a plug-connected appliance. It has a 3.7A start-up current and 0.53A running current, so the intended electrical provision should be available at the installation point.

The unit has energy consumption of 1.01 kW per 24 hours and a noise level of 42 dBA. These figures help buyers compare the unit's daily operating demand and likely sound contribution within an active preparation area.

This Williams unit has supplier reference TW18-S3, barcode 5050984298271 and a pack quantity of 1. It weighs 44 kg and includes a 2-year parts and labour warranty.