It is designed for front-of-house cooking stations preparing crepes, pancakes, buckwheat cakes, chapatti, blini and foods such as griddled eggs. Its double cooking format supports operators who need two round surfaces for preparing items side by side.

It has 2 cooking plates, each measuring 400 mm in diameter. This provides 2 x 400 mm cooking surfaces for preparing separate portions at the same time.

Spiral heating elements are integrated beneath the thick enamelled cast-iron plates to distribute heat across the cooking surfaces. The smooth, hard-enamelled plates are easy to clean and also retain heat and transfer it directly to the food, supporting consistent results from the centre to the edge.

Its normal heat-up time is approximately 10 minutes. The orange heating lights switch off when the selected temperature has been reached, helping the operator judge when each plate is ready for cooking.

Yes. Each plate has its own thermostat control and indicator lights, so the operator can manage the 2 cooking surfaces independently. The green light shows that a plate is switched on, while the orange light indicates an active heating period.

A temperature of approximately 200°C to 220°C is recommended for cooking crepes, corresponding to control positions 5 to 6. The thermostat can then be adjusted for the particular food rather than leaving the machine continuously at full power.

Disconnect it, allow it to cool completely and clean the exterior with warm water, washing-up liquid and a non-abrasive product. Rinse with a damp sponge and dry with a soft cloth. Do not use a water jet or immerse the machine, cable or electrical connection.

It measures 240(H) x 860(W) x 500(D) mm and has a silver finish. It is a double crepe maker without an undershelf, so buyers should plan a suitable supporting work surface around its 860 mm width and 500 mm depth.

Yes. A T-bar crepe spreader is supplied for distributing batter across the round cooking plates. The machine has a pack size of 1, so the order is for a single double-plate crepe maker with its supplied spreading tool.

The Smart UK product code is GD345, while the Roller Grill manufacturer reference is 400CDE. These references help buyers identify the correct double electric crepe maker when ordering or requesting product support.

It includes a 2-year parts and labour warranty. Keep the product's commercial name, type and serial number available when requesting after-sales assistance, as these details help identify the exact machine requiring support.